Loading Printing Paper - Canon PIXMA iP3300 Guide De Démarrage Rapide

Loading Printing Paper

You can load A4, Letter, or B5-sized plain paper in the Front Feeder. You cannot load any other
paper in the Front Feeder. For information on loading paper in the Auto Sheet Feeder, refer to the
User's Guide on-screen manual.
Important
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
1
Open the Front Feeder (A).
2
Extend the Paper Output Support
(B).
3
Set the Paper Thickness Lever (C)
to the left.
4
Load the paper in the Front Feeder
with the print side facing DOWN and
the leading edge to the far side.
Do not load higher than the Load Limit
Mark (A).
5
Align the right edge of the paper
stack against the inner face of the
Front Feeder, and the near and left
edges with the Paper Size Mark (B).
6
Pinch the Paper Guide (C) and slide
it against the left side of the loaded
paper stack.
7
In the printer driver, select Front Feeder for Paper Source.
4 Loading Printing Paper
All manuals and user guides at all-guides.com
(C)
(B)
(A)
(C)
(B)
(A)