Printing Photographs Directly From A Compliant Device - Canon PIXMA iP3300 Guide De Démarrage Rapide

Printing Photographs Directly from a
Compliant Device
Printing from a PictBridge Compliant Device
You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile
phone and print recorded images directly without using a computer.
Note
PictBridge is an industry standard enabling a range of digital photo solutions, including the direct
printing of photos from a digital still camera, camcorder or mobile phone* without the need to use a
computer. A device can be connected to this printer for direct printing regardless of the manufacturer or
the model as long as it complies with the PictBridge standard.
You can select the images to print and specify various print settings from your camera or mobile phone.
* PictBridge compatible digital still cameras, digital camcorders, and camera-equipped mobile phones
are hereafter collectively referred to as "PictBridge compliant device".
A device with this mark is PictBridge-compatible.
Connecting a PictBridge Compliant Device
To connect a PictBridge compliant device to this printer, use a USB cable recommended by the
device's manufacturer.
Caution
Do not connect any equipment other than PictBridge compliant devices to the Direct Print Port of
the printer. If you do so, electric shock, fire, or damage to the device could result.
Note
When printing photos with the digital device connected to the printer, we recommend the use of the
AC adapter supplied with the device. If you are using the device battery, be sure to charge it fully.
1
Set up the printer.
Refer to the Easy Setup Instructions (Setup Sheet) to set up the printer and make it ready for
printing.
2
Turn on the printer and load the paper in the Auto Sheet Feeder.
Note
When printing directly from a PictBridge compliant device, you can only use the Auto Sheet Feeder
as the paper source. Do not load paper in the Front Feeder.
3
Connect the PictBridge compliant device to the printer.
Note
Depending on the model or brand of your device, you may have to select a print mode compliant
with PictBridge before connecting the device. You may also have to turn on the device or select
Play mode manually after connecting the device to the printer.
Perform necessary operations on the PictBridge compliant device before connecting it to this
printer according to instructions given in the device's instruction manual.

Printing Photographs Directly from a Compliant Device

All manuals and user guides at all-guides.com
7