Loading Paper - Canon G3060 Série Mode D'emploi

Loading Paper

1
Extend the paper support.
2
Open the feed slot cover and slide the right-
hand side paper guide to the far right.
a
3
Load several sheets of paper with the print side
facing up and slide the side paper guide against
the edge of the paper stack.
a
Transporting Your Printer
When relocating the printer, check the following. Refer to the Online Manual for details.
Check that both joint buttons are pressed down
completely to avoid ink leaks.
Check that the position of the ink valve lever is closed.
6
b
b
4
Close the feed slot cover.
5
When Save the rear tray paper information
appears on the printer's screen, press the OK
button.
6
Select the paper size and type, and press the OK
button.
7
Extend the paper output tray.
Pack the printer in a plastic bag in case ink leaks.
•
Pack the printer in a sturdy box so that it is placed with its
bottom facing down, using sufficient protective material
to ensure safe transport.
•
Do not tilt the printer. Ink may leak.
•
Please handle with care and ensure the box remains flat
and NOT turned upside down or on its side, as the printer
may be damaged and ink in the printer may leak.
•
When a shipping agent is handling transport of the
printer, have its box marked "THIS SIDE UP" to keep the
printer with its bottom facing down. Mark also with
"FRAGILE" or "HANDLE WITH CARE".