Communication Ports; Connection Of Rs232 Or Usb Communication Port (Optional) - Eaton Pulsar Série Manuel D'installation Et D'utilisation

2.4

Communication Ports

Connection of RS232 or USB communication port (optional)

The RS232 and USB communication ports cannot operate simultaneously.
Tower model
RT model
1. Connect the RS232 (33) or USB (34) commu-
nication cable to the serial or USB port on the
computer equipment.
2. Connect the other end of the communication
cable (33) or (34) to the USB (1) or RS232 (2)
communication port on the UPS.
The UPS can now communicate with EATON
power management software.
86-86700-00EN A02 - Page 13