Maytag MGDC465HW Guide De Démarrage Rapide

OPERATING INSTRUCTIONS
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil
on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS, located in your
appliance's Owner's Manual, before operating this appliance.
Button Descriptions
1. TEMPERATURE
Select a drying temperature based on the fabrics in your load. If you are
unsure of the temperature to select for a load, select the lower setting
rather than the higher setting.
2. CYCLE CONTROL KNOB
Use the Cycle Control knob to select available cycles on your dryer. Turn the
knob to select a cycle for your laundry load. See the online "Cycle Guide" for
details.
TIMED DRY
Will run the dryer for the specified time on the control. On models with a
selectable temperature knob, you may choose a setting based on the fabrics in
your load. Drying time and temperature will depend on your dryer model.
SENSOR DRY/AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts off when the load
reaches the selected dryness level. Gives the best drying in the shortest time.
Drying time will vary based on fabric type, load size, dryness setting, and
temperature setting.
WRINKLE CONTROL Feature (on some models)
The Wrinkle Control feature will run after your drying cycle is complete. It
periodically starts and stops the dryer, tumbling the load without heat to help
avoid wrinkling.
Wrinkle Control automatically starts at the end of the cycle. Opening the door
will stop this feature.
NOTE: A signal will sound periodically when the Wrinkle Control setting is
selected, but only if the End of Cycle Signal is also selected.
W11355745A
W11355961A-SP
Dryer Quick Start Guide
Step 1. Clean Lint Screen
Step 2. Load Clothes; then Close
Door
Step 3. Select Cycle and Settings
Step 4. Press Start
Not all features, cycles, and options are available on all models. Appearance may vary.
3. WRINKLE CONTROL Feature (on some models)
When you are unable to remove a load of clothes from the dryer as soon as it
stops, wrinkles can form. The Wrinkle Control option periodically tumbles,
rearranges, and fluffs the load to help keep wrinkles from forming.
 Get up to 90 minutes of heat-free, periodic tumbling at the end of a cycle.
Turn the Wrinkle Control knob to Off or 90 min. at any time before the cycle
has ended.
Cycle Guide – Normal Cycle
Sensor Dry/Automatic Dry — Senses moisture in the load or air temperature and shuts off when the load reaches
the selected dryness level.
Items to Dry: Cycle: Temperature:
Jeans, heavy work Energy Preferred High
clothes, towels
Normal
Work clothes, Medium or Low
medium-weight
fabrics, sheets
Casual, shirts, Low
pants, lightweight
items, synthetics,
delicates,
athleticwear
NOTE: Government energy certifications for the Maytag
the Maximum drying temperature setting. The as-shipped defaults of Sensor Dry, Automatic Dry, Low Heat, Wrinkle
™
Shield were not used.
NOTE: If loads do not seem as dry as you would like, select Very Dry the next time you dry a similar load. If loads
seem drier than you like, select Less Dry the next time you dry a similar load.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please
see the Owner's Manual included with your machine.
For information on any of the following items, the full cycle guide, detailed product dimensions, or for complete
instructions for use and installation, please visit https://www.maytag.com/owners, or in Canada
https://www.maytag.ca/owners. This may save you the cost of a service call.
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
4. PUSH TO START/END OF CYCLE SIGNAL
The End of Cycle Signal produces an audible sound when the drying cycle is
finished. Promptly removing clothes at the end of the cycle reduces wrinkling.
Turn the End of Cycle Signal knob to select the desired setting (On or Off).
Press the Push to Start knob to start the dryer.
Description:
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Electric models were based on the Timed Dry cycle with
®
Canada:
1–800–688–2002
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7