Ice Service; Care And Cleaning - GE 12 Manuel D'utilisation

About ice service.
Care and cleaning of the refrigerator.
6
Ice Trays
To release ice cubes, turn the tray upside
down, hold it over a container, and twist
both ends.
Icemaker Accessory Kit
An icemaker accessory kit is available from your dealer. Check the back of the
refrigerator for the specific icemaker kit needed for your model.
Water Supply Kits
Kits containing copper tubing, shutoff valve, fittings and instructions needed to
connect the icemaker to your cold water line are available at extra cost from your
dealer or from Parts and Accessories. In the U.S. call 800-626-2002. In Canada call
1-800-361-3400 and refer to kit numbers WX8X1 through WX8X4.
Cleaning the Outside
Keep the outside clean. Wipe with a clean
cloth lightly dampened with kitchen
appliance wax or mild liquid dish detergent.
Dry and polish with a clean, soft cloth.
Do not wipe the refrigerator with a soiled dish
cloth or wet towel. These may leave a residue
that can erode the paint. Do not use scouring
pads, powdered cleaners, bleach or cleaners
containing bleach because these products can
scratch and weaken the paint finish.
For only one or two ice cubes, leave the
tray right-side up, twist both ends slightly,
and remove as many cubes as you want.
Wash ice trays in lukewarm water only—do not
put them in an automatic dishwasher.
Protect the paint finish. The finish on the
outside of the refrigerator is a high quality,
baked-on paint finish. With proper care, it
will stay new-looking and rust free for years.
Apply a coat of kitchen/appliance wax
when the refrigerator is new, and then at
least twice a year.