Publicité
Les langues disponibles
Les langues disponibles
PREPARATION
• Unpack turbine and check all parts are present (see parts list) and undamaged.
• Prepare surfaces to be sprayed ensuring they are clean, dry and smooth.
• Ensure there is adequate ventilation.
• Mask off all areas not intended for spraying.
OPERATION
• Prepare the spray gun for operation (refer to Spray Gun Instruction Manual supplied separately).
• Plug cordset into turbine unit.
• Attach the nut at the end of the air hose to the air outlet on the turbine ensuring it is screwed on
fully. The connection will be rigid when fitted correctly.
• Join the quick connect hose attachment to the air inlet on the spray gun. Tip: If connection is
tight, loosen the quick connect fitting on the hose by unscrewing a little before connecting to the
gun, then retighten.
5
Publicité
