Andis MLC Instructions D'utilisation Et D'entretien page 9

5. New lithium-ion batteries, unused for a period of time, may not accept a full
charge. This is normal and does not indicate a problem with the battery or
charger. The battery will accept a full charge after several cycles of clipper use
and recharging.
6. Disconnect the charger or the clipper from the AC outlet if extended periods of
non-use are anticipated.
CORRECT BATTERY DISPOSAL
The product you have purchased contains a rechargeable battery. The battery is
recyclable. Please dispose of this battery in a responsible manner. Check with your
local solid waste officials for collection facility or the details in your area for
recycling options or proper disposal.
BLADE & CLIPPER REPAIR SERVICE
When the blades of your Andis clipper become dull after repeated use, it is advised
to purchase a new set of blades available through your Andis supplier or through
an Andis authorized service station. Some blade sets can be resharpened - contact
Andis Company for information on resharpening. If you wish your clipper to be
serviced as well, it should be carefully packed and mailed either Parcel Post
Insured, or U.P.S. to any Andis authorized service station. To contact Andis
directly, please call our Customer Support Team at 1-800-558-9441 or email
us at support@andisco.com
CAUTION: Never handle your Andis clipper while you are operating a water faucet, and
never hold your clipper under a water faucet or in water. There is danger of electrical
shock and damage to your clipper. Andis Company will not be responsible in case of
injury due to this carelessness.
9