Andis MLC Instructions D'utilisation Et D'entretien page 7

USING ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
To use, slide front of attachment comb over the teeth of the blade. Snap comb
down over back of blade (Figure C). Use the clipping guide to find the approximate
lengths of cut. Different blade angles in relation to the skin, thickness and texture
of the hair will vary the cutting length.
Description
Standard Andis Blade
1/8" Attachment Comb
1/4" Attachment Comb
3/8" Attachment Comb
1/2" Attachment Comb
3/4" Attachment Comb
1" Attachment Comb
CLIPPER BLADE ADJUSTMENT
Your Andis adjustable clipper blade set is easy to adjust. From coarse to fine cuts,
all that is needed is a flick of the adjustment lever with your thumb. In the upright
position, the blades are set for the finest, or shortest cuts (Figure D).
USER MAINTENANCE
If clipper is not going to be used for a long period of time, store in a safe, cool, dry
place. Do not wrap adapter cord tightly around clipper. Do not hang the clipper by
the adapter cord.
The internal mechanism of your clipper has been permanently lubricated at the
factory. Other than the recommended maintenance described in this manual, no
other maintenance should be performed, except by Andis Company or an Andis
authorized service station. To contact Andis directly, please call our Customer
Support Team at 1-800-558-9441 or email us at support@andisco.com.
CLIPPING GUIDE
Clipping Direction
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
Approximate Length of Cut
Blade set to
shortest cut
1/16" (1.6 mm)
1/32" (0.8 mm)
1/4" (6.4 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
3/4" (19.0 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
Blade set to
longest cut
3/16" (4.8 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
5/8" (15.9 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
1-3/8" (34.9 mm)
1-1/4" (31.8 mm)
7