Description; Operation - Dustcontrol DC AirCube Manuel D'instructions

Description

Th e DC AirCube Air Cleaner is intended for cleaning
the air in a work area and is intended for use as a
compliment to spot extraction. Air is passed through a
combination fi lter and a microfi lter. Th e HEPA fi lter ac-
tually separates particles to 99.95%. Th e com-bination
fi lter separates the majority of the particles and thereby
prolonging the life of the microfi lter.
When a loss of suction capacity is experienced the
pre-fi lter should be changed. If the suction capacity
does not increase after the pre-fi lter change then the
Hepa fi lter should also be changed.

Operation

Connect the machine to a suitable power source ac-
cording to the specifi cation of the machine. When
using an extension cable with the machine, ensure that
the connection is water tight and the extension cable
is suitably rated.
Th e fan has two speed settings which allow for econo-
mical running, for example during the night.
Th e DC AirCube can also be used to discharge air
from work places which must be kept under negative
pressure. A 125 mm hose can be attached to the fan
outlet where necessary.
Th e DC AirCube aircleaner has two speed settings
which allows for economical running, for example
during the night.
DC AirCube - 9 Part No 9457