Use Of The Manual And Symbols Used - Ultraflex UP 18 Manuel D'installation Et De Maintenance

USE OF THE MANUAL AND SYMBOLS USED

The INSTALLATION AND MAINTENANCE MANUAL is the document accompanying the product
from the time of its sale until replacement and disposal. It must be therefore considered an
integral part of it.
It is recommended to read the manual before carrying out ANY ACTIVITIES involving the
product, including its handling and unloading from the vehicle.
In order to protect the user's safety and to ensure the proper operation of the product, in this
manual the symbols described below were adopted.
Denotes that an estreme intrinsic hazard exist which would result in hight
DANGER
probability of death or irreparable injury if proper precautions anon not
taken.
Denotes that a hazard exist which can result in injury or death if
WARNING
proper precautions are not taken.
Denotes a reminder of safety practices or unsafe practices which could
CAUTION
result in personal injury or damage to the product or to the environment.
Important information to highlight for adequate installation and
NOTE
maintenance, but not the cause of
The symbol aside indicates all the operations which must be carried
out by qualified or skilled staff, in order to avoid hazards.
We recommend training the staff in change of the product installation
and checking their knowledge.
The figure below is designed to facilitate the interpretation of some nautical terms contained
in this manual.
STERN
Installation and Maintenance Manual
damage.
PORT
STARBOARD
PUMP FOR HYDRAULIC SYSTEMS -
LEGEND
m.p.h = miles per hour
Km/h = kilometres per hour
10 m.p.h = 8,69 knots
BOW
10 m.p.h = 16,1 km/h
10 knots = 11,5 m.p.h
10 knots =18,5 km/h
10 km/h =6,21 m.p.h
10 km/h = 5,4 knots
5
page