Adjusting The Functions; Adjusting The Grinder Doser; Testing Coffee Delivery; Final Consignment - Sanremo CAFE RACER CR2 Livret D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAFÈ RACER

10 ADJUSTING THE FUNCTIONS

Important: Some of the
machine's functions
(temperatures, language,
etc.) may only be adjusted
by a specialised authorised
technician while the machine
is in operation and exercising
great care. The operations to be
performed are described in the
technical manual.
10.1

ADJUSTING THE GRINDER DOSER

Install, adjust and prepare the
grinder doser as described in the
relative manual.
10.2

TESTING COFFEE DELIVERY

Deliver coffee a number of times following the
instructions in chapter 11 and check the quality of
the coffee.
- Deliver the coffee and check that 20-30 cc of
coffee are delivered in 20-30 seconds;
- If this is not the case, the coarseness of the
coffee must be adjusted on the grinder doser
EN
finer grinding increases brewing time, coarser
grinding reduces brewing time
Make sure the coffee delivered has the following
characteristics:
- hazelnut coloured crema
- consistency with fine bubbles
- crema lasting more than 1 minute.
These indications are not
binding as the correct quantity
and therefore quality of coffee
depends on the type of coffee,
type of water and climate.
10.3

FINAL CONSIGNMENT

At the end of installation, proceed as follows:
- Train the personnel who will be operating the
machine, preparing a number of test coffees,
cappuccinos, etc....
Adjusting the functions
- Explain how to perform maintenance and
cleaning operations to ensure correct care of the
machine.
- At the end of installation, fill in the installation
report.
36

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cafe racer cr3

Table des Matières