Programming; Programming Doses - Sanremo CAFE RACER CR2 Livret D'instructions

CAFÈ RACER

12 PROGRAMMING

The machine can be programmed using buttons A,
B and C on the groups

12.1 - PROGRAMMING DOSES

The amount of coffee can be programmed for all
buttons, except the continuous delivery button (B).
IMPORTANT: By programming
the left keyboard automatically,
the programmed doses are
transferred to the other push
buttons
EN
- The coffee doses can be customised separately
for each group by repeating for that group the
programming operations performed on the first
group on the left.
Programming coffee doses
Turn the machine on as described in the relative
chapter.
To programme the coffee doses, proceed as
follows:
- Attach the portafilter with the coffee to the
left hand group as described in the chapter
"Operating the machine".
- Position one or two cups under the group
depending on the brewing you want to
programme.
- Press and hold the button (B) for at least 5
seconds until the light on the button flashes and
"Programming doses Select in 30 secs" flashes
on the display:

Programming

programming doses

Select in 30 sec
- Within 30 seconds, press the button
corresponding to the type of coffee you want to
programme (for example, button (A) for a single
espresso coffee).
During delivery, the LED on button (A) remains on
steadily, the other buttons go off and the LED on
button (B) flashes.
- When the required amount of coffee has been
delivered into the cup, press button (A) to stop
delivery. The amount of coffee delivered for that
button will be saved.
- If necessary, repeat the above operations to also
programme the other buttons. The machine exits
programming mode automatically 30 seconds
after the last button has been pressed.
Programming quantities for tea
- Access programming mode as described for
coffee, then when button (B) flashes, press
button (D) to start delivering hot water. When
the required amount has been reached, press
button (D) again to stop delivery.
- The machine exits programming mode
automatically 30 seconds after the last button
has been pressed.
46