Creating The Slice Files - ATOMSTACK Cambrian Pro Manuel D'utilisation

9.2 Creating the Slice files

1. Under the "PREPARE" tab, click the Import button shown by the number "2",
and in the pop-up window, select the model you want to print and double-click
to complete the import
3. After adjusting the model, select the materials you want to print and the
corresponding printing parameters in turn as shown in the figure, and then
click "Slice" to start generating the print data, that is, slices
2. After importing the model, if the model exceeds the printing boundary, the model
will be gray. Click the tool button on the left side of the software to adjust the size,
position, and angle of the model
4. After the slicing is completed, insert the card reader and TF card, and save the
slicing data to the TF card as shown in the figure. Now, we have completed the
production of the print data