WellStore Dual Mag Mode D'emploi page 40

__________________________________________________________
• PREPARATION AND EXECUTION OF PROGRAMS
FREE PROGRAMS
The appliance is equipped with 10
additional modifiable programs,
placed at the end of the 96 preset
programs. The modifiable
parameters are:
- DURATION
from 001 "to 600"
- BF FREQUENCY
from 1 Hz to 100 Hz
- POWER BF
from 10 Gauss to 100 Gauss
- START HF
from 500 Hz to 15,000 Hz
(the starting point
scan)
- STOP HF
from 500 Hz to 15,000 Hz
(the end point of the scan)
- ACTIVATE BF
(to activate or not the BF section)
- ACTIVATES HF
(to activate or not the HF section)
HOW TO PROGRAM
THE FREE PROGRAMS
When the message appears on the
display:
C H O O S E
P R O G R A M
Using the arrows "PROGRAMS
▲ / ▼" select one of the 10
free programs between
n. 97 to n. 106
P R O G R A M M 9 7
F R E E 0 1
Pushing the EDIT button you enter
the situation in which you can
modify the parameters starting
from DURATION up to ACTIVATE HF.
With the LF START-STOP and HF
START-STOP buttons you can select
the parameters to be modified
while with the "PROGRAMS ▲ / ▼"
buttons you can change the values
to be assigned to the parameters.
Press EDIT again to store the
settings.
APPLICATION
OF DIFFUSERS
The application of the magnetic
diffusers is very simple. In fact, it is
sufficient to position the diffusers
on the parts to be treated (our
external thighs example), blocking
them with the supplied elastic
bands, then activate the treatment.
EN
40