WellStore Dual Mag Mode D'emploi page 38

__________________________________________________________
• INSTALLATION
PUT IN ACTION
Remove the appliance from the
packaging and place it on a stable
horizontal rigid surface, suitable
for supporting its weight, near a
power outlet. The space around
the appliance must not be less
than 20 centimeters on all sides.
CAUTION!
The installation of the
device is prohibited:
- in humid environments;
- near large quantities of water;
- near heat sources;
- in direct sunlight.
CAUTION!
Never connect and disconnect
the treatment diffusers when
the device is switched on.
CONNECTION OF THE
TREATMENT HEAD
Insert the speaker connector
into the sockets provided on the
front panel paying attention to
the insertion guide.
It is forbidden to use the device in
atmospheres that may contain
flammable and / or anesthetic
gases.
CONNECTION
TO THE ELECTRICITY NETWORK
Do not use multiple plugs or power
adapters.
Connect the appliance to a tested
and efficient socket, equipped with
earth. If in doubt, do not connect
the device.
Check that the voltage of the
power supply corresponds to the
voltage and frequency indicated on
the appliance plate
(an incorrect power supply voltage
can damage it without
consequences for the user). Using
the appliance that is not properly
connected to the mains can be
dangerous. Before inserting the
cable
plug into the socket
power supply make sure that the
power switch is positioned on
"0" (zero). Insert the power cable in
housing "11" near the switch "12",
making sure that it is fully inserted.
Insert the plug into the socket.
CAUTION!
To avoid strangulation and
suffocation with the power cord:
mount the unit and the power cord
away from the face and out of the
reach of children.
11 12
EN
38