Features - Milwaukee M4910-21 Manuel D'utilisation

Masquer les pouces Voir aussi pour M4910-21:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT SPECIFICATIONS
Flow Rate ............................................................0.31 GPM
Fluid Pressure............................................... 800-3,000 PSI
Air Pressure ............................................................. 5-8 PSI
KNOW YOUR AIRLESS PAINT SPRAYER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
3000 PSI PISTON PUMP
Maintains pressure as needed for different applications.
25 FT. HIGH PRESSURE HOSE
The 25 ft. high pressure hose allows the user to spray a larger
area without moving the paint sprayer.
AIRLESS SPRAYING MODE
The pressurized fluid moving through the spray nozzle will
be atomized as it is sprayed.
BUCKET TRAY
Compatible with up to a 5-gallon container.
CONTROL PANEL
Single interface with all controls conveniently located.
DUAL-ACTION™ PISTOL-GRIP SPRAYER
The DUAL-ACTION™ pistol-grip sprayer easily switches
between airless and fine finish applications.
ELASTIC STRAP
Helps to secure the paint bucket to the body of the
sprayer.

FEATURES

Input ................................. 120 V, AC only, 60 Hz, 15 Amps
Weight ...................................................................... 41 lbs.
FINISH SPRAY TECHNOLOGY
The two-stage turbine delivers high volume, low pressure
(HVLP) spray for fine finish applications.
FOLDING HANDLE
The handle folds down for convenient storage.
INTAKE FILTER
The intake filter keeps debris from entering the paint
system.
ON-BOARD ACCESSORY STORAGE
The removable storage bag provides convenient storage
for the pistol-grip sprayer, spray tips, hose adaptor, high
pressure hose, and other accessories.
VARIABLE PRESSURE CONTROL
 Lower pressure is for priming, cleaning, and for thinner
materials and finish spraying.
 Higher pressure is ideal for latex and airless spraying
applications.
PRIME/SPRAY SELECTOR
Allows you to switch from PRIME mode to SPRAY mode.
RAPID VALVE RELEASE
Dried paint or other debris can clog the check valve and
prevent the unit from priming correctly. Pressing the Rapid
Valve Release button before each start keeps paint flowing
cleanly through the check valve and allows quick and easy
start-up of the unit.
REVERSIBLE SPRAY TIPS
The unit includes two reversible spray tips that clear paint
clogs quickly.
8 — English

Publicité

Table des Matières
loading

Table des Matières