Technical Characteristics - toscano vigilec compact V1M Guide D'utilisation

Coffret digital multifonctionnel de commande et protection pour 1 pompe jusqu'à 25a, 230 ou 400 vac
Masquer les pouces Voir aussi pour vigilec compact V1M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

21. TECHNICAL CHARACTERISTICS

Power suply
Admissible voltage variation
Max. current
Protections
Display
Signaling
Overload setting (I.max)
Underload setting (I.min)
Restart time setting
Inhibition time setting
Overload trip time
Underload trip time
Capacitor maximum capacity
Probes operating voltage
Probes sensitivity
External input ON/OFF
Alarm and auxiliar output
contact
Recorded information
Control terminal blocks
Mounting method
Cable glands
(Power/Motor/Control)
Working temperature
Protection degree
Size
Net weight
Software version
40
Distribuido por Adajusa
Vigilec Mono (V1M)
230 VAC
+/-20% (>30%: Auto Power Off)
18 Amp AC3
Overload, Underload, Excessive
frequency of starts,
Anti-blocking.
LED 4 digits
Pump ON, Alarm, Low level,
Max. current (I.max), Min.
current (I.min), Restart time and
flow switch inhibition.
0.6 - 20.0 Amp
OFF- 0.5 –19.8 Amp
from 3 minutes to 99 hours or
manual
5-200 seconds (flow switch)
7 seconds
4 seconds (20 sec. at startup)
80uF (50uF inside the unit)
24 VAC
10 K ± 15% Ω
Voltage or contact from 6 to
400 VAC/VDC
AC1: 2 A/250 VAC
AC11: 1 A/230 VAC
Running hours, number of
starts, number of alarms and
last alarm current.
4 mm
2
Mounting brackets or direct to
wall
1xM20/1xM20/2xM16
-10 +55ºC
IP56
185 x 200 x 95 mm
950 g
V.1.4
Vigilec Mini (V1N)
230/400 VAC (selectable)
+/-20% (>30%: Auto Power Off)
16 Amp AC3
Overload, Underload, Phase-loss,
Excessive frecuency of starts,
Anti-blocking.
LED 4 digits
Pump ON, Alarm, Low level,
Max. current (I.max), Min.
current (I.min), Restart time
and flow switch inhibition.
0.6 - 20.0 A
OFF - 0.5 - 19.8 A
from 3 minutes to 99 hours or
manual
5-200 seconds (flow switch)
7 seconds
4 seconds (20 sec. at startup)
-
24 VAC
10 K ± 15% Ω
Voltage or contact from 6 to
400 VAC/VDC
AC1: 2 A/250 VAC
AC11: 1 A/230 VAC
Running hours, number of
starts, number of alarms and
last alarm current.
4 mm
2
Mounting brackets or direct to
wall
1xM20/1xM20/1xM20+2xM16
-10 +55ºC
IP56
225 x 255 x 110 mm
1,8 Kg
V.1.4

Publicité

Table des Matières
loading

Produits Connexes pour toscano vigilec compact V1M

Ce manuel est également adapté pour:

Vigilec compact v1n

Table des Matières