Led Signalling - toscano vigilec compact V1M Guide D'utilisation

3. LED SIGNALLING

Depending on the operation being performed or the warning that the equipment is
indicating, the LEDs will light up in different colors and in a fixed or intermittent manner.
While scrolling through the various parameters, pay attention to the meaning shown in
the "During adjustment" column. If the equipment is in operation and the control panel is
not being used, look at the "In operation" column.
●
During adjustment
Imax Imax
Imax
Imax
Imax Imax
Imin Imin
Imax Imax
Imax Imax
Imin Imin
Imax Imax
Imin Imin
Imax Imax
Imax
Imin Imin
Imax
Imin Imin
Imax Imax
Imin Imin
Imin Imin
Imin
Imin
Imin Imin
Distribuido por Adajusa
Parameter selection
Imax
Imax
"Overload setting"
Imax
Imax
Imax
Parameter modification
Imax
Imin
Imin
"Overload setting"
Imax
Imin
Imin
Parameter selection
Imin
Imax
"Underload setting"
Imin
Imax
Imin
Imax
Parameter modification
"Underload setting"
Imin
Imin
Parameter selection
Imin
"Restart time setting"
Parameter modification
"Restart time setting"
Parameter selection
"Inhibition time setting"
Parameter modification
"Inhibition time setting"
Imax Imax
Imax Imax
Parameter selection
"Datalogger and advanced
option setting"
Imin Imin
Imin Imin
Parameter modification
"Datalogger and advanced
option setting"
Fixed
●
In operation
Imax Imax
Imax Imax
Imax Imax
Imax Imax
Imax Imax Imax Imax
Imax Imax
Imin Imin
Imax Imax
Imax Imax
Imin Imin
Imin Imin
Imin Imin Imin Imin
Imin Imin
Imin Imin
Imin Imin
Imax
Imin Imin
Imax
Imin
Imin
Imax
Imax
Imin
Imin
Flashing
Overload detected
Imax
Imax Imax
Overload trip
Imax
Imax
Imin
Imin
Underload detected
Imin
Imin
Imin
Underload trip
Restart time running
Inhibition time running
Low level detected
Pump running
Main alarm activated
23