GoPro HERO 4 BLACK Mode D'emploi page 77

To Secure the Camera in the Housing:
1. Open the housing and drop the camera into position.
2. Make sure the seal around the backdoor is free of debris.
3. Close the housing backdoor and squeeze it closed to ensure a
good seal.
4. Pivot the hinged arm backwards and hook the lip of the latch into
the grooved top of the housing backdoor.
5. Push the latch down to snap it into place.
Slim housing insert camera
WARNING: Always secure the camera in its housing when using
the camera in or around water. Do not get the camera or the
battery wet.
/ Camera Housing
77