GoPro HERO 4 BLACK Mode D'emploi page 21

CAPTURING VIDEO
1. Press the Power/Mode button [
Video mode.
2. If necessary, select a different video capture mode (Video, Video +
Photo, or Video Looping):
a. Press the Settings/Tag button [
b. Press the Shutter/Select button [
to the desired capture mode.
c. Press the Settings/Tag button [
menu. The icon for the selected capture mode appears in the
upper left on your camera status screen.
3. Press the Shutter/Select button [
and the camera status lights flash while the camera is recording.
4. To stop capturing, press the Shutter/Select button [
status lights flash three times and the camera beeps three times.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers off.
PRO TIP: When the camera is off and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing video just
by pressing the Shutter/Select button [
recording and power off the camera. For details, see Setup Mode.
/ Video Mode
] repeatedly until you get to
] to open the settings menu.
] repeatedly until you get
] to close the settings
]. The camera beeps once
]. The camera
]. Press again to stop
21