Power Connection - Beko RCNE520E32X Manuel D'utilisation

Installation

3.4. Power connection

A
WARNING:
sockets in power connection.
B
WARNING:
be replaced by Authorized Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
• Our firm will not assume responsibility for
any damages due to usage without earthing
and power connection in compliance with
national regulations.
• The power cable plug must be easily
accessible after installation.
• Connect the refrigerator to an earthed
socket with 220-240V/50 Hz voltage. The
plug must comprise a 10-16A fuse.
• Do not use multi-group plug with or without
extension cable between the wall socket
and the refrigerator.
Hot Surface Warning!
Side walls of your product is equipped
with refrigerant pipes to improve the
C
cooling system. Refrigerant with high
temperatures may flow through these
areas, resulting in hot surfaces on the
side walls. This is normal and does not
need any servicing. Please pay attention
while touching these areas.
Refrigerator / User Guide
Do not use extension or multi
Damaged power cable must
9/32 EN