Adjusting The Stands; Power Connection - Beko GN163121 Manuel De L'utilisateur

Installation

3.3. Adjusting the stands

If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
In order to adjust the doors vertically,
position of the door
In order to adjust the doors horizontally,
Loosen the fixing bolt on the top
Screw the adjusting bolt (CW/CCW) on the side
according to the position of the door
Tighten the fixing bolt on the top for the final
position
Refrigerator / User Guide

3.4. Power connection

A
WARNING:
sockets in power connection.
B
WARNING:
be replaced by Authorized Service.
C
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
The power cable plug must be easily
accessible after installation.
Do not use multi-group plug with or without
extension cable between the wall socket and
the refrigerator.
9 / 37 EN
adjusting nut
fixing nut
fixing nut
adjusting nut
Do not use extension or multi
Damaged power cable must