General Instructions; Safety Instructions - Grammer MSG87/722 Mode D'emploi

General instructions

The operating instructions must be read in full before use.
• • • •
The operating instructions must be kept in the vehicle and always be at hand.
• • • •
The driver's seat may only be fitted, serviced and repaired by specialist personnel.
• • • •
The respective national regulations and the vehicle manufacturer's fitting instructions must
be observed.
The national fitting regulations can be obtained from GRAMMER AG or from agencies of
the company, or from the vehicle manufacturer.
Wearing parts such as rollers, absorbers and the fixation must be checked from time to
• • • •
time.
A correctly functioning and individually adjusted driver's seat is essential to your health.
• • • •
Take adequate care of your seat and have it serviced regularly to ensure that it functions
correctly.
The functional checks are to be carried out at least as regularly as vehicle services
(see maintenance plan for vehicle).
These operating instructions should always be kept with the driver's seat. If the seat is
• • • •
passed on to a third party, it must be accompanied by the relevant operating instructions.
Subject to modifications due to technical progress and to the resulting deviations from the
• • • •
series seat.

Safety instructions

Driver's seats that have been adjusted incorrectly have a smaller moving area.
• • • •
To prevent personal injury, the weight adjustment must be adjusted to the individual
weight of the driver prior to every commissioning of the vehicle and whenever another
driver uses the seat.
To prevent injury, no objects should be placed within the moving area of the driver's
• • • •
seat.
Before using the driver's seat remove eventually existing packaging materials from
• • • •
seat-and backrest cushions.
To eliminate any risk of accident, the settings must be checked to ensure they are
• • • •
correctly engaged before the vehicle is driven.
Adjustments must not be made while driving. Only touch the lever for setting the fore/aft
• • • •
adjustment at the indented grip provided for that purpose.
– RISK OF CRUSHING –
When the backrest cushion has been removed, the backrest frame must be supported,
• • • •
for example held in place, before the backrest adjuster is operated. If you fail to do so,
there is danger that the backrest frame may jerk forward and cause injury.
20
GB