Sennheiser 2000 IEM Serie Notice D'emploi page 7

Specifications
SR 2000 IEM, SR 2050 IEM
RF characteristics
Frequency ranges
Transmission frequencies
Switching bandwidth
Frequency stability
Antenna output
RF output power at 50 Ω
AF characteristics
Modulation
Compander system
Nominal/peak deviation
MPX pilot tone (frequency/
deviation)
AF frequency response
AF input BAL AF IN L (I)/BAL
AF IN R (II)
Max. input level
THD (at 1 kHz and nominal
deviation)
Signal-to-noise ratio at nomi-
nal load and peak deviation
AF output LOOP OUT BAL L
(I)/LOOP OUT BAL R (II)
Overall device
Temperature range
Power supply
Current consumption
Dimensions
Weight
Aw: 516 – 558 MHz
Aw+: 470 – 558 MHz
Bw: 626 – 698 MHz
Cw: 718 – 790 MHz
up to 3,000 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 32 factory-preset channels
6 frequency banks, each with up to 32 user programmable
channels
up to 75 MHz
±10 ppm (–10 °C to +55 °C)
BNC socket, 50 Ω
typ. 10/30/50 mW (Low/Standard/High), switchable
wideband FM stereo (MPX pilot tone)
Sennheiser HDX
±24 kHz / ±48 kHz
19 kHz / ±5 kHz
25 – 15,000 H z
2 x XLR-3/¼" (6.3 mm) jack combo socket, electronically
balanced
+22 dBu
< 0.9 %
> 90 dB
¼" (6.3 mm) stereo jack socket, balanced
SR 2000
–10 °C to +55 °C (14 °F to 131 °F)
0.1 A
approx. 217 x 483 x 43 mm (8.54" x 19.02" x 1.69")
approx. 2,500 g (5.51 lbs)
Dw: 790 – 865 MHz
Gw: 558 – 626 MHz
Gw1: 558 – 608 MHz
GBw: 606 – 678 MHz
SR 2050
100 – 240 V ~
0.2 A
approx. 2,700 g (5.95 lbs)
2000 IEM Series | 7