Disposal - easymaxx 06918 Mode D'emploi

EN
3. Then, centre the valve as well as possible and tighten with the valve key clockwise
to secure.
4. Completely infl ate the SUP board and tighten the valve once again.
Air is leaking out from the inside of the valve
1. Remove the protective cap.
2. Press the valve pin several times and let go. Is the valve tight? Then perhaps it was
just the valve pin that become off set.
3. If air continues to escape, unscrew the valve out of the SUP board using the valve
key (Picture H2).
4. Check whether the seal is correctly seated on the valve and adjust if needed.
5. Check whether any foreign objects (e. g. Threads) have gotten caught in the valve
and remove if so.
6. Then, centre the valve as well as possible and tighten with the valve key clockwise
to secure.
7. Completely infl ate the SUP board and tighten the valve once again.

Disposal

Dispose of the packaging material in an environmentally friendly manner so that it
can be recycled. If the SUP board and the accessories are no longer going to be
used, dispose of them in an environmentally friendly manner as well.
All rights reserved.
06918_DE-EN-FR-NL_A5_V1.indb 20 06918_DE-EN-FR-NL_A5_V1.indb 20
20
29.11.2019 09:54:49 29.11.2019 09:54:49