Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.3.4 Audio activation by pressing button ("Push-to-talk" mode)
If the communication between the door panel and the video door phone is disturbed or absent, check that
the transparent film covering the video door phone display has been removed. If the film was removed and
the audio is still disturbed, try to activate the two audio channels (from the outside in and from the inside
out) one at a time.
After having received a call, briefly press
button pressed
button
to listen.
Function off
4.3.5 Default settings
Supplementary video door phone ref. 1723/97
4.4 VIDEO DOOR PHONE REPLACEMENT CASES
The dip switch configurations referred to the various replacement cases of the video door phone are shown
below:
1. One-family system with "Master" configuration
2. One-family system with "Slave" configuration
3. Two-family system for apartment 0 (APT0) with "Master" configuration
DS1723-049A
to activate the audio channel towards the outside and speak to the caller. Release the
Dip-switch 6 position
ON
1
2
3
4
5
Function
Slave 1 video door phone
Slave 2 video door phone
Slave 3 video door phone
to activate the control panel audio; afterwards, hold the
Function on
6
7
8
ON
1
2
3
4
5
6
7
8
Configuration
ON
1
2
ON
1
2
ON
1
2
ON
1
2
3
4
5
6
7
8
Dip-switch 6 position
ON
1
ON
1
3
4
5
6
7
8
3
4
5
6
7
8
3
4
5
6
7
8
2
3
4
5
6
7
8
2
3
4
5
6
7
8
21
Hide quick links:
Publicité
Chapitres
Table des Matières
