Olimpia splendid CALDO UP T Instructions Pour L'installation, L'emploi Et L'entretien page 50

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
9.7.1 - Free mode "P6" setting
a. After selecting
Number (Monday) flashes on the display; confirm the day with button
5 seconds. If you do not confirm, the display automatically switches to the next day
(Tuesday) and so on until
b. Confirm the day and set the desired switching on hour with buttons
(the display shows
c. Set the desired switching off hour with buttons
Press button
d. Set all the days of the week by operating in the same manner.
Note:
It is necessary to set both the switching on and switching off hour for all the days.
It is only possible to set the hour, not the minutes.
After setting the switching on and switching off hours for all the 7 days of the week,
the appliance sets itself to weekly mode; the LED 24/7 flashes on the display.
Quick setting
a. While the LED ÷ flashes, press
b. Press button
setting the switching on and switching off hours (leave
c. Repeat the same operations for the other days (from Tuesday to Saturday).
d. When
e. Set the switching on hour and confirm with button
f. Set the switching off hour.
Pressing button
weekly mode.
Once the mode is set, the appliance will memorize it even
if the timer is deactivated.
Memory will delete if the appliance is electrically discon-
nected.
EN - 22
mode, press button
). Press button
(within 10 seconds) to confirm.
to confirm and then press button
(Sunday) flashes, confirm with button
to confirm will cause the appliance to automatically start in
(within 10 seconds) to confirm.
(Sunday).
(within 10 seconds) to confirm.
and
and
to select day (Monday).
.
within
and
(the display shows
two more times without
).
.
).

Publicité

Table des Matières
loading

Table des Matières