Olimpia splendid CALDO UP T Instructions Pour L'installation, L'emploi Et L'entretien page 48

9.6 - Flap functioning
When the appliance is on, pressing button
If it is desired to stop the flap in a certain position to direct the air flow, press button
again when the flap is oriented as desired.
Press the button one more time to start the flap oscillation again.
9.7 - Weekly Timer mode
This mode can only be started when the appliance is in
heating (it cannot be started when the appliance is work-
ing as a fan only) or in set temperature mode.
It is needed to set the current day and hour before using this function.
This operation must be performed during the first start-up
of the appliance or after having electrically disconnected
it.
Work as follows:
a. Start the appliance functioning in minimum power heating mode. In addition to the
FAN LED, the LOW LED also switches on on the appliance display.
b. Press button
appears on the display.
c. Press buttons
07= Sunday).
Press button
The display shows
d. Press buttons
(within 10 seconds) to confirm and pass to the minutes setting.
The display shows
e. Press buttons
(within 10 seconds) to confirm.
EN - 20
to set the current day of the week.
and to set the current day (01= Monday, 02= Tuesday, ....
(within 10 seconds) to confirm and switch to the hour setting.
.
and to set the current hour (from 0 to 23). Press button
O 0
.
and to set the minutes (from 0 to 59). Press button
will cause the flap to start oscillating.
, which indicates "Monday",