Guarantees And Limitations Of Liability - Qilive Q.5870 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
6.4. CLEARING A BLOCKAGE
EN
When the vacuum cleaner detects a slowdown in suction power, the "Dust bag full"
indicator (3) will turn red. Turn off and unplug the vacuum cleaner immediately.
1.
Check whether the dust bag (22) is full or misplaced.
2.
If the dust bag is not full, check whether the motor filter (23) and HEPA filter (25)
need cleaning or replacement.
3.
Check for blockages. Remove the suction hose (11) from the vacuum cleaner, and
detach the telescopic tube (14) and cleaning tool (16, 18, 19 or 20). Carefully check
inside the hose receptacle (2), suction hose (11), telescopic tube (14), and cleaning
tool individually for any obstruction and remove it.
7. GUARANTEES AND LIMITATIONS OF
LIABILITY
This product is guaranteed for a period of 36 months (including the legal guarantee of
24 months as defined by local law as well as a commercial guarantee of 12 additional
months offered by the brand) from the date of purchase, against any failure resulting
from a manufacturing or material defect.
This guarantee does not cover damage resulting from a faulty installation, incorrect use,
or normal wear and tear.More specifically, the guarantee does not cover:
Damage or problems caused by incorrect use, accidents, modifications or an
electrical connection with the wrong current or voltage.
Products that have been modified or whose tamper evident seal or serial number
has been damaged, altered, removed or rusted.
Replaceable batteries and accessories are guaranteed for 6 months.
Battery failure, as a result of over-charging or non-compliance with the safety
instructions set out in the manual
Cosmetic damage, including scratches, bumps and any other element.
Damage caused by any servicing operations carried out by non-authorised persons.
Faults caused by normal wear and tear or the normal ageing of the product
Software updates as a consequence of changes to network settings
Product failure resulting from the use of third party software to modify, change or
adapt the product as supplied
Product failure resulting from its use without manufacturer-approved accessories
Rusted products
The manufacturer is not liable for the loss of data stored on the hard drive. Similarly,
the manufacturer is not required to check that SIM/SD cards have been removed from
returned products.
Repaired or replaced products may include new and/or repackaged hardware and
components.
14

Publicité

Table des Matières
loading

Table des Matières