Rival Crock Pot 38601-W Guide Du Propriétaire page 3

428-0888(04EFM1) viaual.qxd
HOW TO USE YOUR SMART-POT
1. Always cook with the lid on, for the recommended time.
2. Follow recommended cooking times.
3. Do not use the slow cooker stoneware for storage of foods.
4. Do not reheat foods in your Crock-Pot
5. Do not set heated unit filled with food on a finished wood table.
6. Unplug when cooking is done and before cleaning.
7. Removable stoneware is ovenproof and microwave safe. Do not use
removable stoneware on gas or electric burner or under broiler.
CAUTION: Always place protective padding under stoneware before
setting on table or countertop.
NOTE: Do not cook or reheat foods on the Warm Setting.
HOW TO PROGRAM YOUR SMART-POT
4 or 6 hours for HIGH temp. cooking
POWER on
indicator
light
COOK TIME sets the time
and cooking temperature
NOTE: To reduce the risk of electric shock, cook only in removable
stoneware.
1. Place food in stoneware according to recipe.
2. Plug in Smart-Pot ™ slow cooker. The Power light will begin to flash
indicating that the unit is plugged in, but not turned on.
10/23/04 15:35 Page 4
™
® slow cooker.
™
8 or 10 hours for LOW temp. cooking
Once cooking
time elapses,
the Smart-Pot
automatically
shifts to the
WARM setting,
keeping your food
at the perfect
serving temperature
without
turns power off
overcooking.
-E4-
HOW TO PROGRAM YOUR SMART-POT
3. Push the Cook Time button to scroll through the timed cooking
options. Push once and the 4 hour light will illuminate, twice and the
6 hour light will come on, etc. Select the time based on the length of
time indicated in the recipe. Two time options are usually given. The 4
and 6 hour settings are the HIGH temperature setting and may be
used when you want your food done quicker. The 8 and 10 hour
settings correspond to the LOW temperature setting and is used for all
day cooking. In addition your Smart-Pot
Setting by scrolling through the timed cooking options until the warm
light illuminates.
NOTE: The Warm setting is for keeping already hot food warm. Do not use
the warm setting to cook or reheat food.
4. When the cooking time is completed, the Smart-Pot
automatically shift to the Warm setting and the Warm light will come
on. NOTE: We do not recommend using the Warm setting for more
than 4 hours.
5. To turn the Smart-Pot
wall outlet.
6. For other recipes that give a range of times, select the time closest
™
to the setting on your Smart-Pot
cooking time of 7 to 9 hours on LOW, set your Smart-Pot
NOTE: If power goes off then power light will blink and settings must be
reset. If cook time is changed before the cycle is complete the time will
reset to the new setting.
™ (CONT.)
™ can be set to the Warm
™ slow cooker will
™ off push the OFF button. Unplug unit from the
™ . For instance a recipe calling for
-E5-
™ to 8 hours.