Hikmicro G Serie Mode D'emploi page 5

Steps:
1. Hold the device, and press both battery lock catches of the device.
2. Hold the lock catches, and draw the battery base to take out the battery.
3. Insert the battery into the charging base. You can see the charging status via the pilot lamp on the charging
base.
4. When the battery is fully charged, draw the battery from the charging base.
5. Insert battery into the device.
Note: You need to purchase charging base.
4. Mount Protective Cover
Attach the protective cover when the device is not in use.
Steps
1. Align the threaded hole of the device with the
mounting hole of the lens cover.
2. Insert the screw, and rotate it clockwise to fix the lens
cover.
5. Mount Interchangeable Lens (Optional)
3