Table des Matières
Publicité
Timer and sleep operation (Remote control only) (continued)
12
When the preset time is reached, playback will start. The
volume will increase gradually until it reaches the preset
volume. The timer indicator will blink during timer play-
back.
13
When the timer end time is reached, the system will
enter the power standby mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN socket,
select "USB" or "AUDIO IN" in step 5. This unit will turn
on or enter the power standby mode automatically.
However, the connected unit will not turn on or off.
● To stop the timer playback, follow step "Cancelling
the timer setting" of this page.
Checking the timer setting:
1
Turn the power on. Press the TIMER button.
2
Press the
or
"Daily", and press the ENTER button.
3
Press the
or
Call", and press the ENTER button.
Cancelling the timer setting:
1
Turn the power on. Press the TIMER button.
2
Press the
or
"Daily", and press the ENTER button.
3
Press the
or
Off", and press the ENTER button. Timer will be can-
celled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on. Press the TIMER button.
2
Press the
or
"Daily", and press the ENTER button.
3
Press the
or
On" , and press the ENTER button.
4
Press the ON/STANDBY button to enter the power
standby mode.
All manuals and user guides at all-guides.com
MICRO COMPONENT SYSTEM XL-LS701
button to select "Once" or
button to select "Timer
button to select "Once" or
button to select "Timer
button to select "Once" or
button to select "Timer
E-13
■ Sleep operation
The radio, disc, USB and Audio In can all be turned off
automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the SLEEP button repeatedly
to select the time.
"Sleep 90"
"Sleep 80" ...
"Sleep Off"
4
"SLEEP" indicator will appear.
5
The unit will enter the power standby mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1
While "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STANDBY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the
standby mode, proceed as follows.
1
While "SLEEP" is indicated, press the SLEEP button.
2
Within 5 seconds, press the SLEEP button repeatedly
until "Sleep Off" appears.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback
(steps 2 - 10, page 12).
Sleep timer
Timer playback
setting
setting
1-90 minutes
Sleep operation will
automatically stop
"Sleep 10"
End time
Desired time
Timer playback start
time
Publicité
Table des Matières
