De Orthese Zur Stabilisierung Des Sprunggelenks - Thuasne Ligacast Anatomic Mode D'emploi

In the event of discomfort, significant hindrance, pain, variation in limb volume,
abnormal sensations or change in colour of the extremities, remove the device and
consult a healthcare professional.
For hygiene and performance reasons, do not re-use the product for another
patient.
Do not use the device in case of application of certain products on the skin (creams,
ointments, oils, gels, patches...).
Do not wear the product in a medical imaging machine.
Do not wear the product when driving a vehicle.
The systematic use of a long sock is recommended when wearing the device.
It is recommended to adequately tighten the device to achieve support/
immobilisation without restricting blood circulation.
Undesirable side-effect
This device can cause skin reactions (redness, itching, burns, blisters...) or wounds
of various degrees of severity.
Possible risk of venous thrombosis.
Any serious incidents occurring related to the device should be reported to the
manufacturer and to the competent authority of the Member State in which the
user and/or patient is resident.
Instructions for use/Application
From a sitting position pull on sock with the foot on the floor Ⓐ .
Step into the ankle brace making sure the shells are properly centered along the
ankle Ⓐ .
Fasten the lower strap wrapping it around the brace Ⓑ .
Adjust the strap and fasten securely to the self-fastening surface Ⓑ .
Adjust the small posterior strap using the self-fastening tabs Ⓑ .
Adjust the width of the heel strap if necessary Ⓒ .
Fasten the upper strap wrapping it around the brace Ⓓ .
Carefully slip the foot into a shoe Ⓔ .
The ankle brace may be taken off to allow the foot to be washed.
Only put it back on once you have properly dried the foot again.
Care/Maintenance
Product can be washed in accordance with the instructions shown on this leaflet
and on the label. Wipe with a damp cloth. Do not use detergents, fabric softeners
or aggressive products (products containing chlorine). Do not dry clean. Do not
tumble-dry. Do not iron. Squeeze out excess water. Dry flat. Dry away from any
direct heat source (radiator, sun, etc.).
Storage
Store at room temperature, preferably in the original packaging.
Disposal
Dispose of in accordance with local regulations.
Keep this instruction leaflet.
de
ORTHESE ZUR STABILISIERUNG DES SPRUNGGELENKS
Beschreibung/Zweckbestimmung
Bei diesem Produkt handelt es sich um eine Sprunggelenkorthese zur
Stabilisierung des Gelenks.
Das Produkt ist ausschließlich für die Behandlung der aufgeführten Indikationen
und für Patienten vorgesehen, deren Körpermaße der Größentabelle entsprechen.
Zusammensetzung
Feste Komponenten: Polypropylen - Thermoplastisches Polyurethan.
Textilkomponenten: Thermoplastisches Elastomer - Polyamid.
Eigenschaften/Wirkweise
Feste seitliche Kunststoffschalen ❶ .
7