Automotive Adapter - LG LPA-835 Manuel D'utilisation

Power Connection (Continued)
Connect the Automotive adapter
This unit and its automotive adapter are designed for use in vehi-
cles that have 12 volt, negative ground electrical systems. (This is
standard for most vehicles.) If your vehicle has a different type of
electrical system, the DC power system cannot be used.
a
a Connect the automotive adapter to the DC IN
the unit.
b Connect the automotive adapter to the car's cigarette lighter
socket.
Caution
• To prevent electrical shock and possible damage to your DVD
player or vehicle, always unplug the automotive adapter from
the cigarette lighter socket before you remove the plug from
your DVD player.
• A 3 amp. 250V fuse for protection is installed in the

automotive adapter.

• While the engine is being started, disconnect the
automotive adapter from the car's cigarette lighter socket.
• Do not operate your unit when the car battery is
discharged. Peak current from the car generator may cause the
DC fuse to blow.
b
• If the vehicle's supply voltage drops below approximately 10
Cigarette lighter socket
volts, your DVD player may not work properly.
• Do not leave your DVD player in a place where the
temperature exceeds 70°C (158°F), or the pick-up device
may be damaged.
Examples include:
- Inside a car with the windows closed and in direct
sunshine.
- Near a heating appliance.
jack on
Automotive adapter
• This automotive adapter operates on DC 12V.
• Contact an electrical parts distributor for assistance in select-
ing a suitable automotive adapter.
• Manufactured by WANLIDA GROUP Co., Ltd.
14