Publicité
CHARGE BATTERY PACK
Only charge the battery pack using the charger supplied.
Charging procedure:
1. Connect the charge to a normal USB connection (e.g.
computer). STATUS LED IS PERMANENTLY ON.
2. Connect the batteries using the provided plugs. STATUS LED
FLASHES
3. Batteries are fully charged STATUS LED GOES OFF (charging
time approx. 4-5 hours). The batteries can also be charged
individually.
READY TO START
1. First switch on the transmitter (LED blinks).
2. No you're ready to activate the model.
To do this, push the main switch (power) on the underside of the
model to the "ON" position (you will hear a sound).
OFF
ON
1
BASIC OPERATION AND FUNCTIONS
1. ON/OFF switch.
• slide the ON/OFF switch to the on position; you will hear a start
sound
• repeat every time the transmitter is restarted
ON/OFF
The model is now ready for use.
To switch off after use, switch the model off, and then the
transmitter.
OFF
ON
2
2. Horn key
• the horn sounds when this button is pressed.
15 // GB
Publicité
