Publicité
INSERT DRIVING BATTERIES
1. Open the battery cover.
2. Insert fully charged battery. Observing the correct polarity.
3. Close the cover on the battery compartment again. Ensure that
the cover clicks properly into place. Check that it is in its correct
position.
INSTALLING THE TRANSMITTER BATTERIES
1.
2.
YOUR TRANSMITTER
Transmitter overview
Light ON/OFF
Left
control lever
Raise/lower gripper
arm / rotate crane arm
GB // 14
3.
On/Off button
3
1. Open the battery compartment lid on the reverse of the trans-
mitter.
2. Insert fully charged rechargeable batteries or new AA bat-
teries observing the correct polarity. Close the cover on the
battery compartment again. Ensure that the cover clicks
properly into place. Check that it is in its correct position.
Horn Key
Indicator
Demo button
Right
control lever
Open close gripper / raise/
lower crane arm
Publicité
