Mat With Non-Slip Surface; What Should I Do If The Crockery Warmer Doesn't Work; Environmental Concerns - AEG KDK911422 Mode D'emploi

Masquer les pouces Voir aussi pour KDK911422:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
12
www.aeg.com
stainless steel surfaces can be used.
These products prevent the surfaces
becoming dirty again for some time. Apply
a thin layer of such a product on the
surface using a soft cloth
On aluminium fronted crockery warmers
use a gentle glass cleaning product and a
soft cloth that does not release fluff. Wipe
horizontally without pressing on the
surface since aluminium is sensitive to
scratches and cuts.
5.2. Interior of the crockery
warmer
Clean the inside of the crockery warmer
regularly using a damp cloth.
6. WHAT SHOULD I DO IF THE CROCKERY WARMER
DOESN'T WORK?
WARNING! Any type of repair must
only be done by a specialised technician.
Any repair done by a person not
authorised by the manufacturer is
dangerous.
Before contacting Technical Assistance,
check on the following:
 The crockery doesn't heat up enough.
Check whether:
 The appliance has been switched on.
 The appropriate temperature has
been selected.
 The air circulation orifices are
covered by the crockery.
 The crockery was left to heat up for
sufficient time.

7. ENVIRONMENTAL CONCERNS

Recycle the materials with the
Symbol
applicable containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances.
. Put the packaging in
If it is very dirty add a few drops of
washing-up liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air
circulation opening.
Only use the crockery warmer again when
it is completely dry.

5.3. Mat with non-slip surface

The non-slip surface mat can be removed
to facilitate cleaning of the drawer.
The mat can be cleaned by hand using hot
water with a few drops of washing-up
liquid. Dry thoroughly.
The non-slip mat should only be replaced
when it is completely dry.
 Heating time depends on several
factors, such as, for example:
 Crockery material type and thickness.
 Quantity of crockery.
 How the crockery is arranged.
 The crockery doesn't heat up at all.
Check whether:
 You can hear the noise of a fan. If
the fan is operating then the heating
element is broken; if the fan is not
operating then the fan is broken.
 The switchboard fuses / circuit
breakers have fused / tripped out.
The crockery is heating up too much:
 The temperature selector is broken.
 The on/off switch does not light up:
The switch's pilot light has blown.
Do not dispose appliances marked
with the symbol
waste. Return the product to your local
recycling facility or contact your
municipal office.
with the household

Publicité

Table des Matières
loading

Table des Matières