Product Description And Specifications - Bosch GFZ 16-35 AC Professional Notice Originale

OBJ_BUCH-594-004.book Page 12 Friday, April 29, 2016 4:50 PM
12 | English
Safety Warnings for All Purpose Saws
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
 When the cut is completed, switch off the machine and
then pull the saw blade out of the cut only after it has
come to a standstill. In this manner you can avoid kick-
back and can place down the machine securely.
 Use only undamaged saw blades that are in perfect con-
dition. Bent or dull saw blades can break, negatively influ-
ence the cut, or lead to kickback.
 Do not brake the saw blade to a stop by applying side
pressure after switching off. The saw blade can be dam-
aged, break or cause kickback.
 Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
1 609 92A 2PW | (29.4.16)
Intended Use
The machine is intended for free-hand sawing of wood, plastic
and light building materials. It is suitable for straight and
plunge cuts. The saw blade recommendations are to be ob-
served.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Sword
2 Auxiliary handle (insulated gripping surface)
3 Thumbwheel for stroke rate preselection
4 Lock-off button for On/Off switch
5 On/Off switch
6 Handle (insulated gripping surface)
7 Vacuum connection
8 Extraction duct
9 SDS button for saw-blade release
10 Catch for vacuum duct
11 Saw blade guard
12 Saw blade*
13 Knurled screw for auxiliary handle
14 Spacer tube for auxiliary handle
15 Knurled nut for auxiliary handle
16 Screw for auxiliary handle
17 Saw blade driving pin
18 Engaging pin for saw blade
19 Saw blade guide
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Power Hand Saw
Article number
Rated power input
Stroke rate at no load n
0
Stroke
Sword length
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
GFZ 16-35 AC
0 601 637 7..
W 1600
-1
min 850–2600
mm 50
mm 350
kg 5.2
/ II
Bosch Power Tools