Table des Matières
Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Locking Tabs
L
oquets de sûreté
Lengüetas de cierre
Locking Tabs
L
oquets de sûreté
Lengüetas de cierre
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Two Latches
Deux taquets
Dos pestillos
Tabs
L
oquets
Lengüetas
Two Latches
Deux taquets
Dos pestillos
➢ ➢ Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢ ➢ Always place paper under nozzle
whenever lower plate is removed to
protect floor.
➢ ➢ Place handle in upright position and
turn vacuum cleaner over to expose
lower plate.
➢ ➢ Release lower plate by pressing two
(2) latches and two (2) locking tabs
inward as shown.
➢ ➢ Remove lower plate and remove any
residue that may exist in belt area.
➢ ➢ Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
➢ ➢ Press lower plate until locking tabs
snap into place then push the two (2)
latches outward.
- 30 -
Publicité
Table des Matières
