Cleaning Secondary Foam Filter; Replacing Hepa Exhaust Filter - Panasonic MC-UG471 Manuel D'utilisation

Secondary
Foam Filter
Filtre secondaire
en mousse
Segundo filtro
de goma espuma
Exhaust Filter
Filtre
d'échappement
Filtro de escape
Exhaust Filter
Filtre
d'échappement
Filtro de escape

Cleaning Secondary Foam Filter

Replacing HEPA Exhaust Filter

➢ ➢ Secondary foam filter protects motor.
➢ ➢ Check filter when installing a new
dust bag.
➢ ➢ If dirty, pull filter from bottom of dust
compartment and clean by rinsing in
water.
➢ ➢ When dry, slide filter back into place.
➢ ➢ Ensure filter is fully inserted under
plastic rib projections.
➢ ➢ The HEPA exhaust filter removes dirt
from recirculated air.
➢ ➢ Check filter when installing a new
dust bag.
➢ ➢ If dirty, remove exhaust filter
cartridge.
➢ ➢ Insert new exhaust filter cartridge.
DO NOT CLEAN WITH WATER*.
➢ ➢ Place filter in frame and install in
dust cover. For proper operation the
white side must face dust cover grill.
*Filter cannot be cleaned and should be
replaced at least once each year.
- 28 -