Table des Matières
Publicité
WARNING
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Removing and Installing Lower Plate
Tabs
Languettes
Pestañas
Latches
Loquets
Lengüetas
Electrical Shock or Personal Injury Hazard
Lower Plate
Plaque inférieure
Base inferior
- 38 -
➢
Before servicing any parts,
disconnect vacuum cleaner from
electrical outlet.
➢
Place paper under nozzle anytime
lower plate is removed to protect
floor.
➢
Place handle in down position and
turn vacuum cleaner over to
expose lower plate.
➢
Release lower plate by presing two
(2) latches and two (2) tabs inward.
➢
Remove lower plate and remove
any residue that may exist in belt
area.
➢
Reinstall lower plate by hooking
front end of lower plate into slots
on front of nozzle housing.
➢
Press lower plate into place then
push two (2) latches and two (2)
tabs outward.
Publicité
Table des Matières
