Mountings - Elnur Gabarron X2D Mode D'emploi

Mountings

Lift off the cover by using
a screwdriver.
Use the screwdriver to remove
the batteries supplied from the
unit (wall mounted) or remove
the battery cover (fitted on base).
Wall mounting
2
3
Secure the thermostat using the screws
and pegs or fit onto a flush-mounted box
(➊, distance between
centres 60 mm).
Fit the batteries back,
ensuring that they are
Fitted on base
Using the support provided, you can
place the transmitter on an item of
furniture (see § Location).
- 23 -
correctly fitted.
AUTO
PRO PROG