Elnur Gabarron X2D Mode D'emploi page 26

CF04 - Circulator
anti-seizing
Circulator anti-seizing
Press + or - to make your choice, OK to confirm it and
go to the next menu.
CF05 - Cyclic mode
If the receiver is associated with
other X2D domotics products
(transmitters, remote controls,
alarm control unit, etc. excluding
door/window magnetic contacts),
the cyclic mode must be disabled.
Cyclic mode
Press + or - to make your choice, OK to confirm it and
go to the next menu.
No anti-seizing
Anti-seizing enabled (start up
1 minute after 24 hours shutdown)
Enabled (without domotics products)
Disabled (with domotics products)
- 26 -