Elnur Gabarron X2D Mode D'emploi page 27

CF06 - Association with receiver(s)
On the receiver, press the button
until the LED flashes.
On the transmitter, press + from
the CF06 menu.
The transmitter sends a frame to
the receiver. The X2D symbol is
displayed briefly.
Check that the receiver's LED is
no longer flashing.
The receiver is associated with the transmitter.
Press OK to go to the next menu.
CF07 - Radio test
The transmitter sends a frame to
the receiver every 3 seconds. The
X2D symbol is displayed briefly.
Check that the receiver LED
flashes each time it receives the frames.
To cancel the manual mode, press the C button or turn
the knob.
- 27 -