Absence Mode - Elnur Gabarron X2D Mode D'emploi

Absence mode

This mode is used to set a tempe-
rature (5 to 15°C) for a period that
can be set from 1 to 365 days.
From the automatic mode (AUTO),
press the button.
The number of days flash on and
off.
Press + or - to set the number of
days.
Example: leaving on 10 January,
returning on 19 January, indicate
9 days.
Automatic operation will restart on
19 January at 00.00 h.
Press OK to confirm.
The temperature flashes on and
off.
Press + or - to set the temperature.
Press OK to confirm.
To cancel the absence mode (e.g. when returning
early), press the C button or turn the knob.
- 32 -