Programming - Elnur Gabarron X2D Mode D'emploi

Programming

When starting up, the "Comfort mode from 6am to
11pm" program is applied to all the days of the week.
To change the programming,
turn the knob to PROG.
The 1 st time slot flashes on and off.
Time slot
consulted
Day
1 st time
Program
slot
profile
Economy mode
for 1 hour
Go to the next
Confirm and go to
Comfort
program change
the next day
for 1 hour
Quick programming:
To apply the same program to the following day, press
and hold the OK button for approximately 3 seconds
until the program of the following day is displayed.
Turn the knob to exit the programming mode.
- 30 -