Starting Up - Elnur Gabarron X2D Mode D'emploi

Starting up

Turn the knob to Shutdown and
press the right-hand button for
5 seconds until H200 vx:xx is
displayed (maintenance menu
reserved for the installer).
Press OK.
The screen displays CF01.
CF01 - Correction of room temperature
measurement
If there is a difference between
the temperature noted (thermo-
meter) and the temperature
measured and displayed by
the unit, the menu acts on the
measurement of the probe so as
to compensate for this difference (from -4°C to +4°C in
steps of 0.1°C).
Press + or - to make your choice, OK to confirm it and
go to the next menu.
- 24 -
5 sec.