Christopeit Sport AB 1000 Notice De Montage Et D'utilisation page 12

STEP 4:
Attach the cushion holder (6) at front support tube (3).
1. Push the cushion holder (6) into the matching holder at front sup-
port tube (3), set it at the desired position and lock it by inserting the
bolt with the quick release (21) in place and doing it up tight. (Note: To
screw in the quick release (21), the threaded hole in the Front support
(3) and one of the holes at cushion holder (3) must be align. Further-
more, ensure that the cushion holder (6) is not pulled out of the front
support tube beyond the marked maximum position. The setting of the
cushion can be adjusted as desired later. For this, the quick release
(21) must be loosened by only a few revolutions, the cap of the lock
must be pulled away and the cushion adjusted. Then secure the new
setting by tightening the quick release.). Attention: Ensure before eve-
ry exercising that the cushion is tighten firmly.
STEP 5:
Checks
1. Check the correct installation and function of all screwed and plug
connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the machine
and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these
may be required for repairs or spare parts orders becoming necessary
later.
12
6
21
3
GB