Error Messages - Sharp SD-SG11 Mode D'emploi

Error Messages

SD-SG11
When an error message is displayed, proceed as follows:
Error messages Meaning


BLANK MD
Nothing is recorded. (Neither
music nor disc name is re-
corded.)


Can't COPY
You tried to record from a
copy prohibited CD.


Can't EDIT A track cannot be edited.


Can't READ*
The disc is damaged.


(*: Number or TOC information cannot be
symbol) read.


MiniDisc not specified.


Can't REC Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.


Can't T REC Timer recording is impossible
or there is no available space
on the MD.


The disc is out of recording
space.


Can't WRITE The TOC information could
not be created properly due to
a mechanical shock or to
scratches on the disc.


CD NO DISC A CD has not been loaded.


The CD data cannot be read.


DISC FULL The disc is out of recording
space.


EDIT OVER You chose 21 or more tracks
for track editing.


Er - MD ** A MiniDisc is not working
properly.
(**: Number or
symbol)
E-45
Remedy
Error messages


Replace it with another disc. MD NO DISC


Replace the CD.
NAME FULL


Change the stop position of the
track and then try editing it.


Replace it with another disc.
NOT AUDIO


Erase the disc and try recording
again.
PLAYBACK MD


PROTECTED
Re-record or replace the Mini-
Disc.
TEMP OVER


Replace it with another record-
able disc.
TOC FORM **
(**: Number or
symbol)


TOC FULL
Set this unit to the stand-by
mode and try to write the TOC
again. (Remove any source of
TOC FULL 1
shock or vibration while writing.)


Load a CD.


Reload the CD.
? MD DISC


Replace the disc with another
recordable disc.


Decrease the number of tracks.


Press the MD button.


Set this unit to the stand-by
mode and turn the power on
again.
Meaning Remedy



A MiniDisc has not been load- Load a MiniDisc.
ed.



The MiniDisc data cannot be Reload the MiniDisc.
read.



The number of characters for Shorten the disc or track name.
the disc name or track name
exceeds 40.



The data recorded on this disc Replace the disc.
is not audio data.



You tried to record on a play- Replace it with another record-
back-only disc. able disc.



The disc is write protected. Move the write protection tab
back to its original position.



The temperature is too high. Set this unit to the stand-by
mode and wait for a while.



TOC information recorded on Replace it with another disc.
the MD does not match the

Erase the disc and try recording
MiniDisc specifications or it
again.
cannot be read.



There is no space left for re- Replace it with another record-
cording track numbers. able disc.



There is no space left for re- Replace it with another record-
cording character information. able disc.


Erase the needless charancters.



The data contains an error. Press the MD



MiniDisc not specified. Replace it with another disc.
01/7/12 38-48.fm
button.